The pistol grip allows this tool to be convenient to use at any angle and weighs less than 12 pounds (tool head only).  Designed for cutting 1/2" prestressed concrete strand, 1/2" mild steel round chain, 5/8" reinforcing bar, and 5/8" bolts.  It requires an external hydraulic power source for operation and can be activated by any electric, gasoline, hand battery or air operated hydraulic pump capable of developing 10,000 PSI and having free flow return through the pressure line. The front blade may be adjusted to proper cutting clearance after resharpening. The rear blade has a fixed travel length, which cannot be adjusted. The front blade can be adjusted so that proper clearance between the blade may be maintained.  Approximate cutting times are as follows:  1/2" Prestressed Concrete Strand=3 seconds, 1/2" Round Chain (Mild Steel)= 4 seconds, 5/8" Reinforcing Bar= 4 seconds.  Available as Tool Head only or complete with 240 Volt Electric Pump.

NOTE: Please specify if the Tool is to be used for cutting round chain - a modification of the cutting head is necessary for this purpose.